AC86014
23,68€PIHER clamping bolt, to fit on welding tables with 16mm holes diameter.
– Fiberglass folding handle.
– Steel core.
– Locks in the full length of the bolt.
RC82012
Kit for workbench frame manufacturing.
Length, width, height and tube size are configurable.
Kit Specifications:
- Supporting Points: 4
- Tubes Material: S235 Steel laser cut tubes and plates.
- Surface Treatment: No treatment
- Screws kit included for leveling to the ground
- Assembly: This product needs welding for assembly
- Assembly instructions included
LAM Recommendations:
- It is recommended to follow the assembly instructions to get best results
- If desired it can be applied painting on the product once assembled for better preservation against oxidation
NOTE: Contact with LAM for any different configuration than available in the product form.
RC82011
Kit for workbench frame manufacturing. “H” lower frame.
Length, width, height and tube size are configurable.
Kit Specifications:
- Supporting Points: 4
- Tubes Material: S235 Steel laser cut tubes and plates
- Surface Treatment: No treatment
- Screws kit included for leveling to the ground
- Assembly: This product needs welding for assembly
- Assembly instructions included
LAM Recommendations:
- It is recommended to follow the assembly instructions to get best results
- If desired it can be applied painting on the product once assembled for better preservation against oxidation
NOTE: Contact with LAM for any different configuration than available in the product form.
RB85001
Kit for Riser Block manufacturing to use on your welding table.
The perfect solution for projects where working at different heights is needed (frames, chassis, piping, etc.)
Also useful to extend your LAM welding table (only possible on BL81001).
Length, width and height are configurable.
Kit Specifications:
Material: Steel S355
Treatment: No treatment
Assembly: This product needs welding for assembly
Assembly instructions included
LAM Recommendations:
It is recommended for maintenance to apply lubricant (for example WD40 or similar product) as a protection against oxidation while not using
It is recommended to use an anti-spatter spray while working to avoid welding spatters stick to the surface
It is not recommended to paint the product. The conductive properties may be affected for welding works
It is recommended to follow the assembly instructions to get best results
NOTE: Contact with LAM for any different configuration than available in the product form.
RC82010
Kit for workbench frame manufacturing. “U” lower frame.
Length, width, height and tube size are configurable.
Kit Specifications:
- Supporting Points: 4
- Tubes Material: S235 Steel laser cut tubes and plates
- Surface Treatment: No treatment
- Screws kit included for leveling to the ground
- Assembly: This product needs welding for assembly
- Assembly instructions included
LAM Recommendations:
- It is recommended to follow the assembly instructions to get best results
- If desired it can be applied painting on the product once assembled for better preservation against oxidation
NOTE: Contact with LAM for any different configuration than available in the product form.
AC86013
22,74€PIHER adapter with bar for tubes, to fit on welding tables with 16mm holes diameter.
– Zinc plated and made in carbon steel.
– Swivel surface of zinc plated steel with aluminum support.
– Bar dimensions: Ø16x40mm.
AC86012
18,85€PIHER adapter for tubes, to fit together with the piston system clamp (product AC86011, not included, sold separately) special for using on welding tables.
– Zinc plated and made in carbon steel.
– Swivel surface of zinc plated steel with aluminum support.
– Screws included with two options: locked and free to rotate.
AC86011
71,21€PIHER piston system clamp special for welding tables.
For horizontal and vertical clamping.
– Adjustable to different angles.
– Zinc plated bars and joints made in carbon steel.
– Ergonomic handle, interchangeable and foldable, made in PA with fiberglass.
– Piston pressure surface with M6 thread for assembling accesories.
AC86010
42,63€ – 66,36€Grip-on clamp special for welding tables.
It has a shoe (and includes bar) to be fixed or kept pivoting from a central hole and thus hold parts in drills, light milling, assemblies, welding, etc.
– 5 holes in the base for fixation.
– Grips sloping surfaces without damaging them.
– Easy release.
– Epoxy paint coating.
Includes 16x40mm bar with M8x16 screw for fixation and 18x7mm protector to avoid surface damages.
Available in the following sizes:
– 12 inches
– 14 inches
– 18 inches
– 24 inches
AC86009
39,77€ – 62,43€Grip-on clamp special for welding tables.
It has a shoe (and includes bar) to be fixed or kept pivoting from a central hole and thus hold parts in drills, light milling, assemblies, welding, etc.
– 5 holes in the base for fixation.
– Grips sloping surfaces without damaging them.
– Easy release.
– Epoxy paint coating.
Includes 16x40mm bar with M8x16 screw for fixation.
Available in the following sizes:
– 12 inches
– 14 inches
– 18 inches
– 24 inches
AC86007
Stop tab to use on workbench/welding table.
Length, hole diameter and thickness are configurable.
Specifications:
- Material: Steel S355
- Treatment: No treatment
- Lock-bolt kit not included, sold separately (product AC86004)
NOTE: Contact with LAM for any different configuration than available in the product form.
AC86008
36,19€ – 59,21€Grip-on clamp special for welding tables.
It has a shoe (bar not included) to be fixed or kept pivoting from a central hole and thus hold parts in drills, light milling, assemblies, welding, etc.
– 5 holes in the base for fixation.
– Grips sloping surfaces without damaging them.
– Easy release.
– Epoxy paint coating.
Available in the following sizes:
– 12 inches
– 14 inches
– 18 inches
– 24 inches
